Recommended Products
Condenser Aepinus
Comprising two metal discs, with variable separation, supported on insulating pillars & provided with insulating handles on the ends of the adjustment slide rods, 4 mm sockets too are drilled onto the ends of the rods.
A rectangular glass plate is supplied which mounts in clips between the two discs & may be easily replaced by a plate of some other material to show the effect of different dielectrics. The whole is mounted on a polished wooden base.
Magnetic Field Apparatus
Apparatus To Show Force On Conductor In Magnetic Field – Comprising a strong U-shaped magnet and a pair of brass rails with 4mm socket terminals. A brass axle with plastic discs is free to roll along the rails and completes the electrical contact between them. When the axle is placed on the rails between the poles of the magnet, and a power supply unit is connected, the axle rolls along the rails, away from the centre of the magnetic field. Apparatus To Show Force On Conductor In Magnetic Field for Magnetism Experiment in Physics Lab.
Worchester Electromagnetic Kit
This kit is most versatile as it enable students to perform a wide range of experiments in electromagnetism such as construction of working motors and meters. It comprises eight anisotropic alloy magnets, eight anisotropic ceramic ferrite magnets, four steel magnet yokes, six plotting compasses, four hard board formers for compasses, one bottle iron fillings, four iron filling dispensers, four each double C-cores, clips for C-cores, aluminium rings, split aluminium rings, four each support bases, armature with axle tubes, aluminium axle rods, eight split pins, 16 rivets, one length latex rubber tubing, four each formers for coils, reels cellulose tape, reels copper wire, four each sheets white pasteboard, plain postcard, reels white cotton, four each C-resistors 100 ohm, 10 ohm, ten flash lamp bulbs, four neon bulbs, eight (MES) bulb holders, wood clamp, wood block.
Demountable Transformer
Demountable Transformer for Physics Lab Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I – core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I – core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories
Shop
Showing 457–480 of 566 results
- Biology Specimen
Real Life Science Specimens Centipede
Real Life Science Specimens Centipede –
You can get a great specimen of a REAL, honest-to-goodness centipede mounted in a clear acrylic block. Get an up close and personal look at this! Students and teacher alike will be in awe of its long, leggy body, as well as get a good lesson in insect body structure in the process! Great for looking at details under a microscope, or for having in the classroom, this is a great educational resource for the young science student or for the serious entomologist! Actual size of block is 4.25in x 1.75in x 1in (10.8cm x 4.4cm x 2.5cm).SKU: n/a - Biology Specimen
Real Life Science Specimens Sea Life
Real Life Science Specimens Sea Life -Natural, real insects are carefully encased in an indestructible, transparent acrylic block. These specimens offer a close-up look at some of nature’s most interesting insects. Clear enough for microscope observation. Specimens range in size from 2.9 x 1.6″ to 3 x 3.” 1 to 11/2″ thickness.
SKU: n/a - Biology Specimen
Real Life Science Specimens, Butterfly
Real Life Science Specimens, Butterfly –
Natural, real insects are carefully encased in an indestructible, transparent acrylic block. These specimens offer a close-up look at some of nature’s most intresting insects. Clear enough for microscope observation. Specimens range in size from 2.9 x 1.6″ to 3 x 3.” 1 to 1 1/2″ thickness.SKU: n/a - Biology Specimen
Real Life Science Specimens, Cabbage Worm Cycle
Real Life Science Specimens, Cabbage Worm Cycle –
Natural, real insects are carefully encased in an indestructible, transparent acrylic block. These specimens offer a close-up look at some of nature’s most interesting insects. Clear enough for microscope observation. Specimens range in size from 2.9 x 1.6″ to 3 x 3.” 1 to 1 1/2″ thickness.SKU: n/a - Biology Specimen
Real Life Science Specimens, Devil Horse
Real Life Science Specimens, Devil Horse –
Natural, real insects are carefully encased in an indestructible, transparent acrylic block. These specimens offer a close-up look at some of nature’s most intresting insects. Clear enough for microscope observation. Specimens range in size from 2.9 x 1.6″ to 3 x 3.” 1 to 1 1/2″ thickness.SKU: n/a - Biology Specimen
Real Life Science Specimens, Dragonfly
Real Life Science Specimens, Dragonfly –
Natural, real insects are carefully encased in an indestructible, transparent acrylic block. These specimens offer a close-up look at some of nature’s most intresting insects. Clear enough for microscope observation. Specimens range in size from 2.9 x 1.6″ to 3 x 3.” 1 to 1 1/2″ thickness.SKU: n/a - Biology Specimen
Real Life Science Specimens, Spider
Real Life Science Specimens, Spider -Natural, real insects are carefully encased in an indestructible, transparent acrylic block. These specimens offer a close-up look at some of nature’s most intresting insects. Clear enough for microscope observation. Specimens range in size from 2.9 x 1.6″ to 3 x 3.” 1 to 1 1/2″ thickness.
SKU: n/a - Biology Specimen
Real Life Science Specimens, Starfish
Real Life Science Specimens, Starfish –
Natural, real insects are carefully encased in an indestructible, transparent acrylic block. These specimens offer a close-up look at some of nature’s most intresting insects. Clear enough for microscope observation. Specimens range in size from 2.9 x 1.6″ to 3 x 3.” 1 to 1 1/2″ thickness.SKU: n/a - Biology Specimen
Real Life Science Specimens, Stick Insect
Real Life Science Specimens, Stick Insect –
Natural, real insects are carefully encased in an indestructible, transparent acrylic block. These specimens offer a close-up look at some of nature’s most intresting insects. Clear enough for microscope observation. Specimens range in size from 2.9 x 1.6″ to 3 x 3.” 1 to 1 1/2″ thickness.SKU: n/a - Physics Sound & Waves Lab
Resonance Apparatus
It consists of a tube 100cm long, 25mm dia mounted on a stand which is fitted with leveling screws. The lower end of the rubber tubing provided is connected to the 500ml glass reservoir which slides on a metal rod and can be raised or lowered for adjusting the length of column of air. It is used to measure the velocity of sound waves in air at room temperature by using a tuning fork.
SKU: n/a - Physics Sound & Waves Lab
Ripple Tank
The apparatus consists of a wooden framed tray with a plate glass base and detachable legs, overall size of tray 600x 520x 56mm deep.
A pair of support rods with integral ‘G’ clamps is provided which can be attached to the sides of the tank and used to carry the wave generating system. A set of 4 metal barriers (reflectors) is included consisting of a pair of straight barriers 150 x 25mm, a curved barrier of 215 mm. chord length x 25mm high and a short, straight barrier 25 x 25mm, to minimize unwanted reflections from the sides of the tank a set of four loose gauze strips are provided which, when is use, are arranged around the edges to from a ‘beach’ on all sides.
SKU: n/a - Physics Sound & Waves Lab
Ripple Tank (Dual Purpose)
The apparatus consists of a framed tray with a plexi glass base and detachable legs, overall size of tray 600 x 520 x 56 mm deep. A pair of support rods with integral ‘G’ clamps is provided which can be attached to the sides of the tank and used to carry the wave generating system. A set of 4 metal barriers (reflectors) is included consisting of a pair of straight barriers 150 x 25 mm, a curved barrier of 215mm chord length x 25mm high and a short, straight barrier of 25 x 25 mm.
SKU: n/a
