Recommended Products
Condenser Aepinus
Comprising two metal discs, with variable separation, supported on insulating pillars & provided with insulating handles on the ends of the adjustment slide rods, 4 mm sockets too are drilled onto the ends of the rods.
A rectangular glass plate is supplied which mounts in clips between the two discs & may be easily replaced by a plate of some other material to show the effect of different dielectrics. The whole is mounted on a polished wooden base.
Magnetic Field Apparatus
Apparatus To Show Force On Conductor In Magnetic Field – Comprising a strong U-shaped magnet and a pair of brass rails with 4mm socket terminals. A brass axle with plastic discs is free to roll along the rails and completes the electrical contact between them. When the axle is placed on the rails between the poles of the magnet, and a power supply unit is connected, the axle rolls along the rails, away from the centre of the magnetic field. Apparatus To Show Force On Conductor In Magnetic Field for Magnetism Experiment in Physics Lab.
Worchester Electromagnetic Kit
This kit is most versatile as it enable students to perform a wide range of experiments in electromagnetism such as construction of working motors and meters. It comprises eight anisotropic alloy magnets, eight anisotropic ceramic ferrite magnets, four steel magnet yokes, six plotting compasses, four hard board formers for compasses, one bottle iron fillings, four iron filling dispensers, four each double C-cores, clips for C-cores, aluminium rings, split aluminium rings, four each support bases, armature with axle tubes, aluminium axle rods, eight split pins, 16 rivets, one length latex rubber tubing, four each formers for coils, reels cellulose tape, reels copper wire, four each sheets white pasteboard, plain postcard, reels white cotton, four each C-resistors 100 ohm, 10 ohm, ten flash lamp bulbs, four neon bulbs, eight (MES) bulb holders, wood clamp, wood block.
Demountable Transformer
Demountable Transformer for Physics Lab Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I – core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I – core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories
Shop
Showing 409–432 of 566 results
- Optics Physics Labware
Optical Bench 1 Meter
One meter length, single square stable graduated rod, fitted on two sturdy metal feet with leveling screws. Supplied with four sliders with index marking. Two of the sliders are provided with transverse fine motion knobs. Supplied complete with two lens holders and two sharp optical pins.
SKU: n/a - Optics Physics Labware
Optical Bench 1 Meter Wooden
This is good working bench for junior students..
It comprises a wooden base board 1110 x 115 mm (L x W) with a one meter scale divided in mms and figured at cms, is fixed along the front edge. Supplied complete with following accessories mounted on
100 x 50mm bases.(a) 2 Nos Object and receiving screens
(b) 1 No Plane mirror 150 x 100 mm mounted on a base.
(c) 4 Nos Lens holder with V grooves
(d) 1 No Needle mounted vertically in a short wooden rod
(e) 1 No Candle Holder
Optical centre height of all components is 100 mm.SKU: n/a - Optics Physics Labware
Optical Bench 1.5 Meter
1.5 meter long, for advanced research work; consists of two rods, one stainless steel & one chrome plated steel. The stainless rod is divided in mm. These are supported on heavy cast iron feet with levelling screws. Four specially designed metal sliders having a fine index mark enables reading to be taken on scale with ease & accuracy. The sliders are machined metal so they slide accurately & smoothly on the bed. Two of the sliders have transverse slow motion adjustment. Complete with 6 accessories ( 2 lens holders, 2 optical pins, 1 candle holder, & 1 screen ground glass)
SKU: n/a - Optics Physics Labware
Optical Bench 1.5 Meter Wooden
An inexpensive and simple optical Bench which can be used by junior & senior students alike.
It comprises a wooden base board 1600 x 140 mm (L x W). It has 1.5mtr scale figured in cms and subdivided in mms, six sliding bases 100 x 50 mm each with engraved index line, iron pillars with locking screw. Supplied complete with following accessories:
(a) 1 No Lamp house with white lamp 240V, 15 W
(b) 1 No White metal object screen 75 mm diameter with gauze
(c) 1 No Holder for lenses 38 diameter
(d) 1 No White Metal receiving screen 100 x 75 mm with a slot for squared paper screen on the reverse.
(e) 1 No Object needle mounted in 6 mm rod.
(f) 1 No Plane mirror in metal frame 100 x 75 mm.
All above accessories are mounted on a 6 mm rod which fits into sliding bases. Optical height above base board is 125 mm approx.SKU: n/a - Optics Physics Labware
Optical Bench Accessories Adjustable Slit
Circular blacked metal screen, 75 mm diameter with 12.5 mm central aperture. A screw controlled, spring loaded precision slit is mounted on one side of the disc, the adjustment drive being arranged so that the slit can not be over tightened. The slit has levelled jaws with brass, dovetail section slides, & provides a maximum slit opening of 4 mm approx. with a useful length of 10 to 12 mm. Mounted on a standard 6 mm diameter brass rod, the optical centre height is 80 mm approx.
SKU: n/a - Optics Physics Labware
Optical Bench Accessories Micrometer Slit
The micrometer slit is as above but has a heavier screw thread, 0.5 mm pitch x 6 mm diameter, carrying a drum which is divided into 50 divisions giving a reading of 0.01 mm. An index is provided with a 5 mm scale divided in 0.5 mm divisions.
SKU: n/a - Physics Sound & Waves Lab
Organ Pipe Open Ended
Square section with tapered mouthpiece, made of polished wood, with graduated sliding piston, square in section having a knob at the end for easy handling. The slider is marked with a diatonic scale. It is used to investigate phenomenon of beats in conjunction with a second pipe of same type. Approx. overall length when extended 840mm.
SKU: n/a - Electronics Lab Experiments
Oscilloscope Dual Trace 20 MHz
Elegant, DC to 20MHz Bandwidth 1mV/div Sensitivity on Both Channels CH1 & CH2 Independent Channels CH1 or CH2 Trigger Signal Output Algebraic Addition and Subtraction X-Y Operation 10ns/div to 0.2s/div Time Base Z Modulation TTL Level 8 x 10 cm Display Internal Graticule TV Triggering Frame (V) & Line (H) Line Trigger, ALT Triggering, Trigger Lock Facility, Single Sweep, Variable Hold Off, Component Tester.
SKU: n/a - Electronics Lab Experiments
Oscilloscope Single Trace 10 MHz
DC to 10MHz Bandwidth, 5mV/div Sensitivity, 100ms/div to 100ns/div Time Base, X-Y Operation, Auto or Normal Trigger Selection, Triggering upto 15MHz, 8 x 10 cm Display, Trace Rotation, 140mm Rectangular CRT, Internal Graticule
Space SaverSKU: n/a - Zoology Anatomy Models
Paramecium Enlarged Zoology Model
Paramecium, enlarged approx. 1600 times, showing the cell inventory of a protozoa: macro and micronucleus, contractile vacuoles, cytostome with membranellae, myonemes and food vacuoles and the formation of the endo and ectoplasm and the network of neuronemes, it also shows the structure of the pellicle of the ectoplasm, and the position and order of the trichocysts and a range of cilia in typical order, mounted on base with key card.
SKU: n/a
