Recommended Products
Condenser Aepinus
Comprising two metal discs, with variable separation, supported on insulating pillars & provided with insulating handles on the ends of the adjustment slide rods, 4 mm sockets too are drilled onto the ends of the rods.
A rectangular glass plate is supplied which mounts in clips between the two discs & may be easily replaced by a plate of some other material to show the effect of different dielectrics. The whole is mounted on a polished wooden base.
Magnetic Field Apparatus
Apparatus To Show Force On Conductor In Magnetic Field – Comprising a strong U-shaped magnet and a pair of brass rails with 4mm socket terminals. A brass axle with plastic discs is free to roll along the rails and completes the electrical contact between them. When the axle is placed on the rails between the poles of the magnet, and a power supply unit is connected, the axle rolls along the rails, away from the centre of the magnetic field. Apparatus To Show Force On Conductor In Magnetic Field for Magnetism Experiment in Physics Lab.
Worchester Electromagnetic Kit
This kit is most versatile as it enable students to perform a wide range of experiments in electromagnetism such as construction of working motors and meters. It comprises eight anisotropic alloy magnets, eight anisotropic ceramic ferrite magnets, four steel magnet yokes, six plotting compasses, four hard board formers for compasses, one bottle iron fillings, four iron filling dispensers, four each double C-cores, clips for C-cores, aluminium rings, split aluminium rings, four each support bases, armature with axle tubes, aluminium axle rods, eight split pins, 16 rivets, one length latex rubber tubing, four each formers for coils, reels cellulose tape, reels copper wire, four each sheets white pasteboard, plain postcard, reels white cotton, four each C-resistors 100 ohm, 10 ohm, ten flash lamp bulbs, four neon bulbs, eight (MES) bulb holders, wood clamp, wood block.
Demountable Transformer
Demountable Transformer for Physics Lab Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I – core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I – core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories
Shop
Showing 313–336 of 566 results
- Physics Sound & Waves Lab
Kundts Tube Apparatus
To determine the standing longitudinal waves in column of air and velocity of sound in air, it comprises of a glass tube approx 1.2 meter length and 34 mm diameter. There is a tightly fitting but adjustable piston on a 390 mm long rod at one end of the glass tube. A loose fitting piston attached to a 1.2 meter long sounding rod at the other end of the glass tube, fitted on a wooden base.
SKU: n/a - Optics Physics Labware
Lamphouse and Transformer
Comprising a lamphouse & transformer. The lamp gives a steady light for high intensity. Special design of transformer ensures that the lamp starts immediately as it is switched on. When mounted on the integral stand, the lamp is enclosed by a cylindrical lamp house with a circular aperture & the light centre height is adjustable from 200 mm onwards.
The lamp house is open at the top to allow for ventilation & may be removed for operation on a separate stand, as required. The transformer is housed in a two part sheet steel case with ventilation louvres & has a lamp house supplying rod mounted directly onto the transformer case provide a convenient self contained assembly. A 3 core captive flying lead is provided for mains connection.
SKU: n/a - Mechanics Physics Labware
Lever Kit
This kit helps students understand the concept of moments and principle of lever..
It comprises of 5 plywood beams 600 x 45 x 3 mm graduated at 38 mm intervals, and with a groove across its centre to locate the fulcurm point. Also supplied with four fulcurms 32x32x64mm and 40 metal blanks 25mm square.
SKU: n/a - Optics Physics Labware
Light Box with Optics Kit
For reflection, refraction, and color mixing experiments. The light box consists of a light source 12 V, 24 W lamp, producing convergent, divergent or parallel beam.
On one end, an adjustable cylindrical convex lens (for parallel beam) and on the other end, a triple aperture system for color mixing experiments (lateral aperture are provided with adjustable hinged mirror). All apertures in the box are provided with vertical channels to hold slit plates and color filters. The optical set includes Acrylic Blocks, set of three mirrors, 2 slit black plates, one with three narrow slits at one end and one narrow slit at the other end. Another black plate with four narrow slits at one end, one wide slit at the other end & set of seven mounted color
SKU: n/a - Mechanics Physics Labware
Linear Air Track
The Linear Air Track is designed for the study of linear motion under practically frictionless conditions.
.It is used in experiments and demonstrations of topics such as: Newton’s Law, kinetic and potential energy, collisions, oscillatory motion, velocity, acceleration, conservation of momentum, motion on an inclined plane, conservation of mechanical energy, simple harmonic motion.
It is constructed from an extruded aluminium-alloy section, 2.25m long with equally spaced air holes. Two adjustable feet facilitate simple levelling. Two rows of fine holes provided on each side all along the length of the track through which jets of the air emanate to form air cushion on which the vehicles float under virtually frictionless conditions.
Linear Air Track is supplied complete with following accessories:
2 large vehicles (mass 400g, length 215mm)
1 small vehicle (mass 200g, length 100mm)
2 magnetic buffers (25mm diameter)
2 Plasticine holders (20mm diameter) with central hole
4 catapults (45mm wide) with slot for elastic band
3 steel buffers with central hole
4 elastic cords (220mm long) with plastic rings
1 reel of nylon thread
2 white plastic rods (4mm diameter 150mm long) for stroboscope photography
24 needles for use with steel buffer
20 white plain cards for interrupting light beams
1 reel rubber stand
1 pack of Plasticine
20 elastic bandsAir Blower is designed specifically to be used with the Air Track, Supplied complete with hose, adaptor and mains lead. Operates on 220-240V AC mains, 50/60Hz.
SKU: n/a
