Recommended Products
Condenser Aepinus
Comprising two metal discs, with variable separation, supported on insulating pillars & provided with insulating handles on the ends of the adjustment slide rods, 4 mm sockets too are drilled onto the ends of the rods.
A rectangular glass plate is supplied which mounts in clips between the two discs & may be easily replaced by a plate of some other material to show the effect of different dielectrics. The whole is mounted on a polished wooden base.
Magnetic Field Apparatus
Apparatus To Show Force On Conductor In Magnetic Field – Comprising a strong U-shaped magnet and a pair of brass rails with 4mm socket terminals. A brass axle with plastic discs is free to roll along the rails and completes the electrical contact between them. When the axle is placed on the rails between the poles of the magnet, and a power supply unit is connected, the axle rolls along the rails, away from the centre of the magnetic field. Apparatus To Show Force On Conductor In Magnetic Field for Magnetism Experiment in Physics Lab.
Worchester Electromagnetic Kit
This kit is most versatile as it enable students to perform a wide range of experiments in electromagnetism such as construction of working motors and meters. It comprises eight anisotropic alloy magnets, eight anisotropic ceramic ferrite magnets, four steel magnet yokes, six plotting compasses, four hard board formers for compasses, one bottle iron fillings, four iron filling dispensers, four each double C-cores, clips for C-cores, aluminium rings, split aluminium rings, four each support bases, armature with axle tubes, aluminium axle rods, eight split pins, 16 rivets, one length latex rubber tubing, four each formers for coils, reels cellulose tape, reels copper wire, four each sheets white pasteboard, plain postcard, reels white cotton, four each C-resistors 100 ohm, 10 ohm, ten flash lamp bulbs, four neon bulbs, eight (MES) bulb holders, wood clamp, wood block.
Demountable Transformer
Demountable Transformer for Physics Lab Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I – core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I – core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories
Shop
Showing 265–288 of 566 results
- Human Anatomy Models
Human Muscular Figure Life Size 36 Parts
Complete human muscular and organs anatomy. It illustrates with excellent detail the superficial and deeper muscles, tendons, ligaments, vessels and body structures. The internal organs are removable for closer examination to study the relationships among all the body structures, mounted on base with stand.
Following parts can be removed and studied in detail:
Skull Cap, 6-Part brain, Eye Ball, Breast and abdominal wall, both arms, 2-part larynx, 2 Lungs, Stomach, Liver with gall bladder, Kidney, Whole intestine system, Bladder Half, 2-part penis, 10 Muscles.SKU: n/a - Osteology Models
Human Muscular Skeleton
This model is a replica of a life size human skeleton and shows all the skeleton parts in high details. It is hand-assembled to provide intricate details and long-lasting durability. The main joints are articulated; the upper and lower limbs. The following parts are detachable: Calvarium, Skull, Jaw, Arms, Legs, the left side of the skeleton shows the points of origin (red) and the points of insertion (blue) of the muscles, supplied with a caster roller stand and a transparent dust cover and key card.
SKU: n/a - Human Anatomy Models
Human Pancreas, Duodenum and Spleen Anatomy Model
Life size model is an accurate representation of the pancreas, spleen and duodenum. The pancreas is open to show the entire pancreatic duct. The duodenum is partially dissected to expose its internal structure, mounted on base with stand.
SKU: n/a - Osteology Models
Human Skeleton Model
This model is a replica of a life size human skeleton and shows all the skeleton parts in high details. It is hand-assembled to provide intricate details and long-lasting durability. The main joints are articulated; the upper and lower limbs can be removed easily. The following parts are detachable: Calvarium, Skull, Jaw, Arms, and Legs.
SKU: n/a - Osteology Models
Human Skull Artificial 3 parts
Life size human skull with all structural details, skullcap is removable to show the internal structure of the skull. The mandible is articulated and removable. All of the joints, sutures, fissures, foramina and processes are portrayed with utmost accuracy, supplied with key card.
SKU: n/a - Osteology Models
Human Skull Artificial Economy
Life size human skull with all structural details, skullcap is removable to show the internal structure of the skull. The mandible is articulated and removable. All of the joints, sutures, fissures, foramina and processes are portrayed with utmost accuracy, supplied with key card.
SKU: n/a - Human Anatomy Models
Human Stomach Anatomy Model
This life size model is dissected along the medial plane and can be opened to show the internal structure of the stomach, including the mucosa, the pylorus, and section of the gastric wall. The model also shows the superficial muscular layers with nerves and vascular structures and the blood vessels, mounted on base with stand and key card.
SKU: n/a - Human Anatomy Models
Human Stomach Anatomy Model Economy
This life size model is dissected along the medial plane and can be opened to show the internal structure of the stomach, including the mucosa, the pylorus, and section of the gastric wall. The model also shows the superficial muscular layers with nerves and vascular structures and the blood vessels, mounted on base with stand and key card.
SKU: n/a - Human Anatomy Models
Human Torso Dual Sex 12 Parts
This life size torso composed of 12 parts, with interchangeable male and female genitalia, mounted on a base.
All of the major organ systems are represented with great attention to accuracy and detail. Structures are numbered and identified on the accompanying key card.
SKU: n/a - Human Anatomy Models
Human Torso Dual Sex 24 Parts
This life size torso composed of 24 parts, with interchangeable male and female genitalia, mounted on a base. All of the major organ systems are represented with great attention to accuracy and detail. Structures are numbered and identified on the accompanying key card.
Removable structures include the following:
2 parts of Brain, Eye, 2 Lung, 2 parts of Heart, 2 parts of Stomach, Liver, Half Kidney, 4 parts of Intestine system, 4 parts of Male genital insert, 4 parts of Female genital insert.SKU: n/a - Human Anatomy Models
Human Torso with Interchangeable Sex Organs and open back
Dissectible in 12 parts, Male/Female reproductive organs can be easily taken out dissectible into 2 parts, without ribs cage.
The back depicts the complete vertebral column, spinal cord and nerves. Part of neck and back are open to show vertebral column, mounted on base with key card.
SKU: n/a
