Electronics Lab Experiments
Semiconductor – Cadmium Sulphide Resistor Unit
With photo-sensitive resistor mounted on base as described. Resistance inversely proportional to light intensity.
Related products
- Electronics Lab Experiments
Ohms Law Apparatus
This apparatus is designed to demonstrate Ohms Law. Consisting of a sheet metal enclosure with milliammeter, voltmeter, rheostat, push key and terminal posts..
Simply connect an external battery and a suitable resistance to the terminal posts, then press the push key. Readings are taken from the milliammeter and voltmeter and the resistance is calculated using Ohms Law.* Current flow controlled through circuit by rheostat
* Colour coded connection terminals
* Scratch resistant enclosure
* Circuit diagram printed on enclosure to aid understandingSKU: n/a - Electronics Lab Experiments
Oscilloscope Dual Trace 20 MHz
Elegant, DC to 20MHz Bandwidth 1mV/div Sensitivity on Both Channels CH1 & CH2 Independent Channels CH1 or CH2 Trigger Signal Output Algebraic Addition and Subtraction X-Y Operation 10ns/div to 0.2s/div Time Base Z Modulation TTL Level 8 x 10 cm Display Internal Graticule TV Triggering Frame (V) & Line (H) Line Trigger, ALT Triggering, Trigger Lock Facility, Single Sweep, Variable Hold Off, Component Tester.
SKU: n/a - Electronics Lab Experiments
Power Supply 5 KV E.T.H.
Output 100 to 5 KV at 3 mA continuous. Fully floating EHT circuits suitable for operation of spart, counters, discharge tubes etc. Provided variable output upto 5 KV. The EHT circuit are fully floating so that certain experiments the positive or negative terminals may be safely connected to earth..
The EHT output are taken from 4mm sockets and displayed on a 0 to 5 KV meter. Also on the front panel are a mains switch and indicator lamp. The main fuse is mounted on the back panel. In a robust metal case with feet, mains cable fitted by moulded connector. Cable and connector removable for storage. Workable on 220V 50 Hz.
SKU: n/a
There are no reviews yet.