Electronics Lab Experiments
Power Supply AC/DC Low Voltage with Display Meter
With Digital or analogue display meters, 2 to 12 volts in step of 2 volts..
Four 4mm socket terminals for AC and DC output separately with fuse and indicator in ventilated painted steel cabinet.
a) 4 Amp.
b) 5 Amp.
Related products
- Electronics Lab Experiments
Helmholtz Coils
Provide a substantially uniform field at the centre space. Each coil has a moulded plastic former 152 mm in diameter with 320 turns of 22 SWG, enamelled wire giving a mean diameter of 136 mm..
The rod has a sliding boss which locks into the tapered hole in the universal stand. Dimensions of Coil & support rod 305 x 152 x 25 mm. Supplied with instructions.SKU: n/a - Electronics Lab Experiments
Power Supply A.C/D.C Low Tention
0-20 volts D.C. And 0-25 volts A.C. continuously variable at 10/5/2 Amps. With dual meter to read volts AC/DC.
Output is provided at 4 mm socket terminals separate for A.C. and D.C. ON/OFF switch, indicator and two output safety fuse.
SKU: n/a - Electronics Lab Experiments
Oscilloscope Dual Trace 20 MHz
Elegant, DC to 20MHz Bandwidth 1mV/div Sensitivity on Both Channels CH1 & CH2 Independent Channels CH1 or CH2 Trigger Signal Output Algebraic Addition and Subtraction X-Y Operation 10ns/div to 0.2s/div Time Base Z Modulation TTL Level 8 x 10 cm Display Internal Graticule TV Triggering Frame (V) & Line (H) Line Trigger, ALT Triggering, Trigger Lock Facility, Single Sweep, Variable Hold Off, Component Tester.
SKU: n/a - Electronics Lab Experiments
Power Supply (D.C) Regulated (Digital) 0-30V: Capacity: 10A
The DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument. Its unique feature is overload protection which makes it a safe power source for testing of electronic equipment.
Both voltage and current are precisely regulated with low output ripple. The power supply can be operated in either constant voltage or constant current mode and is protected against overload or short circuit by means of automatic cross-over characteristics from C.V. to C.C.
The output voltage and currents can be read on a meter. A switch is provided to select the LOW or HIGH’ range of current. Maximum voltage is 30 volts.
Specification
Indication of: 3 1/2 digital panel meter voltage/ currentor analog panel meter
Accuracy of DPM: 0.5% + 1 digit
Line Regulation: 0.05% plus 2 mv(for + 10% change in mains voltage)
Protection: Automatic cross-over type of output characteristic from C.V. to C.C.
SKU: n/a
There are no reviews yet.