Electricity & Cell Lab
Lampholder Mounted
Double contact type lamp holder made of brass insert in plastic body mounted on insulated plastic base with 4mm socket terminals.
Related products
- Electricity & Cell Lab
Demonstration Dynamo
This model uses the same basic assembly as the electric motor, mounted on a base plate which also carries a hand drive pulley 120 mm in diameter coupled to the smaller dynamo pulley by a rubber belt. Electric output is via a pair of 4 mm socket & a light emitting diode is provided as simple output indicator. The model may also be used as motor on a 4 to 8 volts DC supply.
SKU: n/a - Electricity & Cell Lab
Ballistic Galvanometer
Used for measurement of small quantities of electrical charge.
Levelling Screws for balancing the coil. Coil with mirror suspended between long suspension at the upper end and a spring at lower end. Suspension and spring are made of phosphor bronze alloy. Bakelite case, rigid and robust. Clamping arrangement for transportation. Consistent sensitivity over a large period. Strip provided for making it a periodic
SKU: n/a - Electricity & Cell Lab
Demonstration Dynamo Model A.C and D.C
A simple dynamo model to differentiate AC from DC. Mounted on a wooden base. Two bulbs are provided for AC & DC current(s). The model is hand driven & when operated, the AC bulb shows flickering light to indicate AC current while the other bulb glows fully indicating DC current.
SKU: n/a - Electricity & Cell Lab
Demonstration Meter
Moving coil type. Basic sensitivity of meter is 5mA, 100mV f.s.d. The meters can be used to demonstrate the working principle of AC or DC ammeters or voltmeters with interchangeable dials. Different dials are available. Housed in a Plastic/Wooden case, with plastic in front and rear.
a) Wooden case b) Plastic case.SKU: n/a
There are no reviews yet.