Electricity & Cell Lab
Double C-Core and Clip
Laminated core to form a roughly rectangular core 92 x 56 x 20 mm approx. With a cross section of 20 x 12 mm & is cut across the middle to produce 2 equal āCās. A strong spring steel strip is provided to hold the two halves together.
Related products
- Electricity & Cell Lab
Worcester Circuit Board Kit
Consists of a base board, complete with terminals, a set of metal connection pillars & a number of clips on flexible connection strips & accessory units; enabling a wide variety of electrical circuits to be constructed quickly & easily. The phosphor – bronze strips are so designed that when flexed a little in the fingers, they are easily slipped over the pass where their natural spring holds them firmly in position & ensures a good electrical contact. Supplied with all the necessary accessories.
SKU: n/a - Electricity & Cell Lab
Demonstration Dynamo Model D.C
A simple demonstration of a Dynamo Model mounted on a wooden base. Hand driven by a gear. Simplified open frame construction which can be readily understood without detriments to its essential similarity to real machine. A 2 pole armature wound by enamelled copper wire to rotate in U shape magnet in pivot. While in rotation process through the gear wheel by hand, the bulb provided glows.
SKU: n/a - Electricity & Cell Lab
Demonstration Dynamo
This model uses the same basic assembly as the electric motor, mounted on a base plate which also carries a hand drive pulley 120 mm in diameter coupled to the smaller dynamo pulley by a rubber belt. Electric output is via a pair of 4 mm socket & a light emitting diode is provided as simple output indicator. The model may also be used as motor on a 4 to 8 volts DC supply.
SKU: n/a
There are no reviews yet.