Engines & Heat Physics Labware
4-Stroke Petrol Engine
Represents a typical air cooled, side-valve four-stroke petrol engine with the operation of the valves clearly evident, cams being driven by a gear train from rear of the main crank. As with the two-stroke model, simulated spark plug uses a small lamp to indicate the firing point. Screw terminals are provided for connection to 3 Volts battery. Cross-section of carburetter is shown. Mounted on base
Related products
- Engines & Heat Physics Labware
Charles Law Apparatus
A glass U tube, 15 mm dia, with one limb plain 220 mm long and other limb graduated 25 to 35 x 0.2 ml, 120 mm long terminating in a bulb 38 mm diameter, with third limb 185 x 6 mm (L x D) joined at right angles to the plane of the other two, short length of glass tubing mounted in end of wide bore plain limb with rubber bung, a piece of rubber tube and a pinch clip..
Supplied with tall form beaker 1000 ml and stirrer. 30 ml mercury is required. Supplied without mercury and without thermometer.SKU: n/a - Engines & Heat Physics Labware
Sectional Model of Steam Engine
The engine model comprises a section cut metal cylinder covered with transparent acrylic plate to observe the working parts -piston, valves, link motion and reversing methods.
The movement of wheel is very light to demonstrate the working even by blowing through mouth. Mounted on a moulded metal base.
SKU: n/a - Engines & Heat Physics Labware
Steam Engine with Boiler
Steam Engine with Boiler for Physics Lab It consists of a powerful fixed cylinder engine with a slide valve driven from a crankshaft eccentric..
The engine is provided with a double take-off pulley and is mounted on a metal base, horizontal boiler with whistle, works on 230V, 50Hz single phaseSKU: n/a
There are no reviews yet.